Anaheim Automation CLCI2000 Manual do Utilizador descarregar pdf (Página 6)

AA37MFC-10

This is a DB37 Cable with a male connector on one end and a female connector on the other. The cable is 10 feet long.

This cable should be used with the CLCI2000 Series Indexer and the AA2M37 Terminal Breakout Board.

AA37MMC-6

This is a DB37 Cable with a male connector on both ends. The cable is 6 feet long. This cable should be used with the

CLCI2000 Series Indexer and the DPI65200 Series Driver Packs.

AA37MMC-10

This is a DB37 Cable with a male connector on both ends. The cable is 10 feet long. This cable should be used with

the CLCI2000 Series Indexer and the DPI65200 Series Driver Packs.

AA2M37

This is a DB37 Breakout Board. This board contains a DB37 Male Connector, and screw terminal blocks to aid in wiring

to the CLCI2000 Series Indexers. The cable needed to interface between the Indexer and this module is the AA37MFC-6

or AA37MFC-10.

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Sem comentários

Anaheim Automation CLCI2000 Manual do Utilizador Página 6