Anaheim Automation MDM60001 Manual do Utilizador descarregar pdf (Página 6)

4 Lead Motors TYPICAL APPLICATION HOOK-UP

Use the specified series motor current to determine the current adjustment

resistor value. Four-lead motors are usually rated with their appropriate series

current, as opposed to the Phase Current which is the rating for 6 and 8 lead

motors.

8 Lead Motors

Series Connection: When configuring the motor windings in series, multiply

the per Phase (or unipolar) current rating by 0.7. Use this result to determine

the current adjustment pot setting.

Parallel Connection: When configuring the motor windings in parallel, multiply

the per Phase (or unipolar) current rating by 1.4. Use this result to determine

the current adjustment pot setting.

NOTE: After the current has been determined, according to the motor

connections above, follow the procedure Determining Output Current on page

7 to find the current value. Then use Table 3 to choose the proper pot setting.

WARNING: Do not connect or disconnect motor wires while power is applied!

1 2 3 4 5 6 7 8 9 10

Sem comentários

Anaheim Automation MDM60001 Manual do Utilizador Página 6