Anaheim Automation MDM60001 Manual do Utilizador descarregar pdf (Página 4)

PIN DESCRIPTIONS P2

Pin# Description

1 Reduce Current: Phase Current Reduction Input. A resistor

between this pin and pin 2 (Connector P2, Current Adjust) will

proportionately reduced the current in both windings (1 second after

the last positive going edge of the step clock input). The amount of

current reduction will depend on the value of the resistor used.

2 Current Adjust: Phase Current Adjustment input. A resistor

connected between this input and the ground input (connector P2,

Pin 3) is used to adjust the maximum Phase Current in the motor. A

resistor MUST be connected to this input.

3 0VDC: Supply Voltage Ground. ( Return )

4 +V: Supply Voltage Input. (+24 -75VDC)

5 Phase 4: of the Step Motor

6 Phase 2: of the Step Motor

7 Phase 3: of the Step Motor

8 Phase 1: of the Step Motor

Table 2 - CONNECTOR P2

TYPICAL HOOK-UPS FOR APPLICATION:

FIGURE 1

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Anaheim Automation MDM60001 Manual do Utilizador Página 4